**Kodak is Hiring!**

We are looking for a **CNC Grinder-Operator** to support our Digital Print Division in Rochester, NY.

As a **CNC Grinder Operator**, you will set up with assistance, operate and adjust CNC lathe and grinding machines.


**Job Duties:**

1) **Setup** (10% of time with assistance from the lead operator or using the SOE as a guide): * Operator understands how to adjust offset to the diameter being machined.
* The operator calculates and performs taper adjustments (diameter difference from end to end) on the machine.
* Operator has experience to determine sequence of rollers to be ground. (Kan Ban)
* Operator can convert numerical values from inches to millimeter and millimeter to inches. (Some jobs are programmed in inches but inspected in millimeters.)
* The operator understands how to complete the yield charts providing feed back to the previous operations.
* The operator can properly dress the grinding wheel (with assistance from the lead operator or using the SOE as a guide)
* The operator has the experience to correctly categorize defects found and record findings on the MRS (manufacturing report sheet).
* The operator understands how to use the laser to inspect roller features. They can also interpret laser printouts to accurately make adjustments to the machine that will improve centering of the roller feature spec. to their nominal specification.
* The operator understands how to operate the Surface Analyzer, to inspect surface finish requirements.
* The operator understands how to use the durometer gauge to check the hardness of the rubber.
* The operator can accurately visually inspect roller surface for inspection criteria per each specific product.
* The operators utilize their training skills to work efficiently and safely.
* It is the operator’s responsibility to keep the CNC environment clean and organized to eliminate hazards and non-valued activity.
* The operators are responsible of the disposal of all the rubber waste and labeling the drums with the proper waste stream labels.
* Operators understand the proper Personal Protective Equipment to wear while performing harmful tasks.
* The operator understands and executes the Lock out Tag out procedure while performing potentially dangerous tasks.
* The operator is responsible of maintaining the proper Ph level of the water-soluble coolant making it user friendly and protective of the machine. (Capco Grinder only)
* The operator works in a safe manner while removing unwanted rubber from the face of rollers by hand while the part is rotating in the machine.
* High School Diploma or GED
* 2+ years’ experience operating CNC, Lathe, grinding machinery or similar.
* Programming experience is plus.
* Shift: 6:00am – 2:30pm M-F
Experience Level

2-10 Years

Minimum Education Level

High School Diploma or GED