Job Details

Level: Experienced

Job Location: Integrated Metal Components - Tualatin, OR

Position Type: Full Time

Salary Range: Undisclosed

Travel Percentage: None

Job Shift: Swing (14:15 - 22:45)

Description

Primary Job Function

This bonus eligible position set ups, adjusts and operates a laser machine and punch to perform such operations as laser cutting, punching, blanking, shearing, forming, and drawing to make parts according to print.

Essential Duties and Responsibilities

Follows department standard operating procedures.
Empties scrap bins.
May instruct and direct the work of less experienced operators.
Approves parts for other operators.
Follows established safety protocols including required usage of PPE; helps to maintain a safe working environment.
Performs periodic preventive maintenance.
Keeps work area clean and organized.
Performs other duties as assigned.

Punch

Coordinates tool changes, selecting proper punch tolerances and die clearances and indexing tool stations accurately.
Deburrs parts as needed, protecting finished parts per cosmetic requirements.
Inspects and sharpens dies and punches for good tool utilization.
Communicates tooling needs as determined from new or revised product and suggests improvements to make the punch work centers productive and efficient.
Positions, aligns and secures punches and dies or die members; adjusts ram stroke and material stop gauges; sets stripper or ejecting mechanism.
Works from drawings, patterns, templates, or samples; produces samples for inspection; adjusts to secure required dimensions and quality and produces runs within desired times.
Maintains tools and machines; perform periodic preventive maintenance.
Writes small programs.

Laser

Sets up and operates machines, loads blanks, dries parts, uses overlays, loads programs, adjusts offsets, changes feed rates, adjusts pierce times.
Cuts different parts, uses prints, aligns nozzle and uses controller.
Shears a wide variety of parts to close tolerances of length, width, parallelism and angle cut.
Makes plan and aligns for most economical use of material
Trouble-shoots cutting.
Cleans cutting head.
Shakes & stacks parts.

Qualifications

Minimum Qualifications and Experience

Minimum skills, knowledge, education, certifications and related job experience that employee typically must have to perform essential functions of the job acceptably.

Previous Laser and/or Punch experience required.
Print reading skills
Ability to properly use measuring tools, calipers, calculator, tape measure and allen wrenches.
Forklift certification preferred
Basic math and measurement skills
Strong attention to detail
Dependability; honesty & integrity; a positive, proactive attitude; ability to use time productively, working with minimal supervision both individually and as part of a team.
Ability to read, write, and communicate effectively.
Ability to work overtime as required

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee may be regularly required to: (a) stand (up to 8 hours per shift), (b) walk, (c) use hands to touch, (d) reach with hands and arms, (e) climb or balance, (f) stoop, (g) kneel, crouch, or crawl, and (h) and talk or hear.
The employee may frequently lift and/or move up to 50 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
May be exposed to noise, dust, fumes, airborne particles, smoke and temperature extremes within OSHA Permissible Exposure Levels.

Note: The above physical requirements are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

We Encourage You to Apply:

We understand that not everyone fits perfectly into a list of qualifications. If you are passionate about this role, our product, and our history, we encourage you to apply even if you don't meet all the listed requirements. We value diverse experiences and are committed to creating an inclusive environment where everyone can thrive.

Pay and Benefits

Starting pay for this position is $19+ per hour – Higher Pay Available Based on Experience!

Our pay ranges are guided by the discipline, level, and experience required. Within the range, individual pay may vary based on additional factors, including desired skills/ technical competency, relevant experience, and advanced education/ training.

Benefits include Medical, Dental, Vision, Life and AD&D, STD, LTD, EAP, Paid Time Off, 401(k) with Employer Contribution, Paid Holidays, as well as a Quarterly + Annual Bonus program.

Signing Bonus

To welcome you to our team and show our commitment to your success, we are offering a signing bonus of $500.00! This bonus will be awarded in two installments, 50% upon successful completion of probationary period and the balance paid upon completion of one year of service with IMC.

About IMC

Integrated Metal Components, Inc. (IMC) was founded in 1995 with the mission to deliver high-quality, on-time products while building lasting partnerships with our customers. We combine cutting-edge precision equipment with a team of highly trained employees to ensure our customers receive the best possible products. Through collaboration, innovation, and an unwavering commitment to excellence, IMC aims to be a trusted, single-source solution for all sheet metal manufacturing needs.

At IMC, our business is built on eight key principles:

Quality
On-Time Delivery
Exceptional Customer Service
Integrity
Developing Partnerships
Competitive Pricing
Consistent Performance
Ongoing Improvement

Additional Information

Integrated Metal Components, Inc. (IMC) is an equal opportunity employer. We are committed to creating a diverse and inclusive workplace and do not discriminate against any employee or applicant based on race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran status, or any other characteristic protected by applicable law. IMC complies with all federal, state, and local laws regarding nondiscrimination in employment. We encourage candidates of all backgrounds to apply.

Integrated Metal Components, Inc. (IMC) participates in E-Verify to confirm the employment eligibility of all newly hired employees. For more information about E-Verify, please visit www.e-verify.gov.