Job Description

Job Description

Position Summary
The inside machinist operate in 3 sections: Machining, Valves and Pumps. Responsibilities and functional knowledge varies based on the designated section.

All inside machinists are encouraged, but not required, to gain experience in any section other than their designated section.

Key Responsibilities & Functional Knowledge
This list is representative of the key areas of responsibility and functional knowledge required of a first class mechanic in the Inside Machine shop.  A first class mechanic must demonstrate an advanced knowledge of the skills, functional knowledge and abilities required to perform tasks in these and related areas of responsibility. 
Advanced knowledge means that the mechanic understands how to perform tasks in these categories (including, but not limited to, the specific tasks identified below) and is able to complete them independently and teach others how to complete the tasks.  This also means that the mechanic has the necessary level of knowledge of the equipment, protective gear, and machinery required to complete these tasks.  A first class mechanic also is expected to strategize independently and problem-solve as appropriate. 
 
Machinists Assigned to the Machining Section

• Operate Machinery - Must know how to operate the following machines safely, and be developing additional skills in the following key areas:
  • Lathes
    • Able to hold tighter tolerances
    • Thread internally and externally
    • Operate and performance maintenance on the following types of lathes:
      • Lathe to 24”
      • Lathe over 24”
      • Vertical Turrent Lathe
    • Perform basic maintenance on the lathes
  • Milling machines

• Able to hold tighter tolerances
• Complete in-line valve repairs
• Perform basic maintenance on the vertical milling machine
• Operate vertical mills
• Trained on the uses of the Horizontal boring mill based on department need (preferred, but not required)
• Drill presses
  • Operate the drill press
  • Assess the drill presses for basic repairs
  • Perform repairs to the drill presses
• Grinders
  • Trained on operating and providing maintenance to surface or gate grinders based on department need (preferred, but not required)
• Flange Facer
  • Operate face flanges on valves and other parts
• Operate Overhead Crane
  • Able to accomplish rigging of equipment and materials
  • Be able to obtain a crane operators license

• Machining Tools
  • Operate band saw
  • Operate a micrometer
  • Use precision measuring tools
• Other
  • Manufacture parts
  • Maintain and repair machinery
  • Repair ship components using more complex blueprints, sketches and sample parts
  • Disassemble, clean, inspect and repair various ships components
  • Assist with in-place machine operations when needed to include: machining, drilling, milling, facing and boring
  • Complete more complex drawings and sketches for use in manufacturing parts mechanical ability
  • Produce machine work at an efficient rate with minimal or no defects that are out of tolerance
  • Plan and accomplish tasks in an efficient manner
• Operate Machinery – Must know how to operate the following machines safely, and be developing additional skills in the following key areas:
  • Lathes
    • Able to hold tighter tolerances
    • Operate the lathe to 24” to manufacture lathes, machine laps, seats and gates
    • Know the basic operations of the Vertical Turrent Lathe to manufacture lathes, machine laps, seats, and gates
    • Assess and provide basic maintenance for lathes
    • Trained in operating and performing maintenance on the Lathe over 24” (preferred, but not required)
  • Milling machines
    • Hold tighter tolerances
    • Accomplish basic in-line valve repairs
    • Know operations of the vertical mill
    • Assess and provide maintenance for the mill
    • Trained on the basic uses of the vertical mill based on department need (preferred, but not required)
  • Drill presses
    • Operate the drill press
    • Assess the drill presses for repairs
    • Make repairs to the drill presses
  • Grinders
    • Gate grinder
      • Operate the gate grinder
      • Know uses of the gate grinder to include grinding gates for valves and fit of the gate for a valve body
      • Provide maintenance and repair for the grinder
    • Trained on operating and providing maintenance to the surface grinders based on department need (preferred, but not required)
  • Flange Facer
    • Work with face flanges on valves and other parts in the shop and on the ship
    • Valve Assembly, Disassembly, Inspection and Repair
      • Perform valve repair procedure
      • Perform work with stencil and mark
      • Assemble valves by following sketches, manuals and/or technical documents
      • Disassemble valves
      • Clean the valve parts without damaging
      • Inspect and repair valves
      • Record findings on a valve sheet before submitting to a supervisor
    • Valve Hydro
      • Test the valve hydro
      • Be present during the check point with supervisor in attendance
    • Valve in line repair
      • Perform valve in line repair on the ship (preferred, but not required)
      • Understand inline repairs
      • Perform basic machining safely
    • Valve Troubleshoot
      • Perform valve repairs and troubleshooting
    • Machining Tools
      • Operate a band saw
      • Operate a micrometer
      • Use precision measuring tools
    • Machinists Assigned to the Pump Section – (*Specialty section assigned based on shop need and employee skill and ability*)
       
    • Know pump operations
    • Know the mechanics of pump parts
    • Disassemble pumps
    • Clean pumps, without damaging
    • Inspect, troubleshoot and repair pumps
    • Reassemble pumps
    • Test a pump Hydro and conduct final inspection

Required Skills and Education

Education Minimum: High School Diploma/GED
Minimum Relevant Experience: 2 to 4 yrs

Practical Theory Requirements

• An Inside Machinist mechanic must demonstrate an advanced understanding of lathe operation, drill press operations, milling machine operations, blueprint reading and layout of projects to be machined.
•  Must be able to read, write and comprehend simple instructions
• Must be able to apply common sense understanding to carry out instructions in written, oral or diagram form
• Must be able to calculate and understand units of measure, including fractions and decimals
• Must know how to measure using a scale and tape measure
• Must be able to wear applicable PPE (Hard hat, safety goggles, gloves, steel toes shoes, ear protection, respirator when necessary)
• Must be able to obtain a government access badge

About BAE Systems Platforms & Services Posting

BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it’s what we do at BAE Systems. Working here means using your passion and ingenuity where it counts – defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team—making a big impact on a global scale. At BAE Systems, you’ll find a rewarding career that truly makes a difference.

The Platforms & Services (P&S) sector under BAE Systems, Inc does the big stuff: the armored combat vehicles, naval guns, missile launchers, and naval ship repair…just to name a few. Our employees take pride in the work they do and why they do it. They are on the front lines every day, building our products to protect the lives of those who serve. We may be biased, but we think P&S does some of the coolest work around, and we think you will too.

Our Commitment to Diversity, Equity, and Inclusion:
At BAE Systems, we work hard every day to nurture an inclusive culture where employees are valued and feel like they belong. We are conscious of the need for all employees to see themselves reflected at every level of the company and know that in order to unlock the full potential of our workforce, everyone must feel confident being their best, most sincere self and be equipped to thrive. We provide impactful professional development experiences to our employees and invest in social impact partnerships to uplift communities and drive purposeful change. Here you will find significant opportunities to do meaningful work in an environment intentionally designed to be one where you will learn, grow and belong.

Preferred Skills and Education

Preferred Relevant Experience: 3 to 5 yrs.
The following skills are not required but based on shop need and interest:

• Stress Relieving
  • Parts and Repair
• Shaft Straightening
• Shaft Overhaul

Typical Education and Experience

.