SUMMARY

The Machinist (CNC/Manual) position programs and operates one or more CNC machining center to perform drilling, tapping, milling, boring and other machining operations over a range of surfaces, diameters, and depths. Determines operation sequence, select and adjust tools and mount in storage matrix. Job set ups may be complex and require milling to very close tolerances. He/She may train and inspect the work of other shop personnel in the correct operation of lathe machining processes and inspect their work. For manual machines, experience setting up and operating either a Harrison lathe that is ten feet between centers and has a 16” swing or a manual engine lathe with a 10- foot bed & turning diameter of 40 inches maximum, to perform horizontal and vertical lathe machining operations on steel in the manufacture of parts for heavy equipment machinery.

ESSENTIAL DUTIES AND RESPONSIBILITIES (may include but are not limited to)

Ensure that safe work practices are followed and adhered to
Check production schedule or shop request list and plan work tasks
Study blueprints, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished work piece, sequence of operations, setup requirements, and check for errors
Accurately measures, numbers, identifies dimensions, and reference points on material for fabrication or other work cells for further machining as necessary
Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines as necessary to machine parts as required
Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, depth, and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media according to established guidelines and procedures
Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required
Inspect finished work-piece(s) to blueprints, quality standards, exact tolerances; using measuring and inspection tools as necessary
Sets up and operates machine on trial run to verify accuracy of machine settings or programmed control data to process steel (some pieces weighing as much as 300 lbs)
Consults with engineers, production management, programmers, or others to resolve machining or programming problems
Maintain a clean and organized work area and maintain all equipment, to like new appearance, according to maintenance plans and established procedures

Assist with directing work activities of any support staff as necessary (forklift operator, CNC machine trainees, and/or material handlers)

Miscellaneous other duties as directed by Machine Shop or Shift Lead

SUPERVISORY AUTHORITY

None

INTERNAL CONTROLS AUTHORITY

None

QUALIFICATIONS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

MINIMUM EDUCATION and/or EXPERIENCE REQUIRED

Experience/Knowledge

See minimum requirements for each level below

Education

No minimum requirement

Job-related Skills and Abilities

Ability to grow lean knowledge and use the tools to identify and assist with continuous improvement

Ability to read and interpret a tape measure, engineering drawings, and bills of material (BOM’s)
Ability to apply concepts such as basic math skills, fractions, micrometers, percentages, ratios, proportions to practical situations, and able to convert decimals into inches

Maintain positive, cooperative working relationships by working, acting, and communicating with various personalities getting along with customers, vendors, co-workers and management working both individually and as part of a team

Skill in working efficiently and accurately to keep up with production requirements
Safe material handling skills in working with steel

Capacity to learn quickly, parts machined are unique to manufactured equipment and change orders are frequent
Flexible and adaptable in coping with pressures, deadlines, and rapidly changing situations
Continue to grow in lean knowledge and use the tools to identify and assist with continuous improvement

Levels of the Machinist (CNC/Manual) Position

Levels will be determined based on education, experience and equivalents.

Machinist (CNC/Manual) Trainee – M (Training Entry Level)

Employee works in a learning capacity. May require a technical degree in machining but little to no work experience. Operates one type of machine tool performing such as grinders, millers, drill presses, lathes, on machining operations of moderate complexity while receiving close supervision. Experience of 2 years or less with heavy equipment production line CNC/Manual machining.

Machinist (CNC/Manual) I – MI (Beginning Level)

Employee works in a learning capacity. May require a technical degree in machining but little to no work experience. Operates one type of machine tool performing such as grinders, millers, drill presses, lathes, on machining operations of moderate complexity while receiving close supervision. Minimum two (2) years’ experience with heavy equipment production line CNC/Manual machining.

Machinist (CNC/Manual) II – MII (Intermediate Level)

Requires a technical degree in machining and/or a minimum of four (4) years’ experience in heavy equipment production line Manual/CNC machining. Safe overhead and jib crane operation experience required. The employee works in a developing capacity with increased responsibility. Operating one or more types of machine tools and performs machining operations for steel parts, tools and machines with close tolerances or high finish requirements. Fits and assembles where necessary, using machinists' hand tools and measuring instruments, typically will receive limited supervision.

Machinist (CNC/Manual) III – MIII (Experienced Level)

Requires a technical degree in machining and/or 7+ years of experience in heavy equipment production line Manual/CNC machining. Works in a developing capacity with increased responsibility operating one or more types of machine tools and performs progressive machining operations for steel parts, tools and machines with close tolerances or high finish requirements. Setups involve familiarity with and understanding of program formats involving combinations of operations such as profile and contour milling, boring, recessing, turning, drilling, threading, etc., to the capacity of the machine and control factor. Checks parts for conformance to specifications, using machinists' hand tools and measuring instruments, typically will receive limited supervision. May make adjustments or program CNC machines in the course of making parts.

Machinist (CNC/Manual) III – MIV (Senior Experienced Level)

Requires a technical degree in machining and/or 10+ years of experience in heavy equipment production line CNC/Manual machining. The employee performs a full range of machining duties requiring a broad knowledge of machining techniques including but not limited to running more than one unit simultaneously, performing advanced setup operations, adjusting and checking out programming, machine troubleshooting, operating numerically controlled machine tools to perform a complex machining operations, exacting tolerances to finishing specifications, and using considerable independent judgment to interpret and apply work guidelines with considerable latitude to specific situations. May independently make decisions in the absence of a Supervisor or Lead. M4 may have the responsibility to mentor, instruct, and set up machines for operators in the three lower level Machinist positions and provide supervision on various duties.

OTHER REQUIREMENTS

Eighteen (18) years of age or older
Pre-employment drug screen, physical and background check
Provide all basic hand tools necessary to perform duties if required
Pass measurement test and accurately read blueprints to be considered for position
Dependability
Willingness to train on first shift if required
Willingness to work any shift when needed
Flexibility to work additional hours when required

PREFERENCES

Safe overhead and Jib crane operation experience for Machinist Trainee and Machinist I
High school diploma or general education degree (GED)

SAFETY

Astec is dedicated to a culture of Behavior Based SAFETY and a Healthy Environment!

Proficient in promoting safe and healthy work environment
Notifies supervisor of product discrepancies or equipment malfunctions
Adheres to established company policies and procedures paying special attention to safety regulations
Report defective materials, equipment, or questionable conditions to the supervisor/manager to identify and correct the root cause
Wear personal protective equipment (PPE) in accordance with training guidelines

Separates scrap or waste materials for recycling, reuse, or environmentally sound disposal
Maintain cleanliness in designated workspace by practicing 6S principles to reduce safety risks

Attend a weekly department safety meeting

ESSENTIAL PHYSICAL DEMANDS

ENDURANCE

	Never	Intermittent <1 hr.	Occasionally 1-3 hrs.	Freq. 3-6 hrs.	Continuous 6+ hrs.	Total Hours in a work day
Sitting		X
Standing					X	7
Walking		X
Describe: Work activities will vary throughout the day.

PHYSICAL REQUIREMENTS

Lift	0 hr.	Intermittent <1 hr.	Occas. 1-3 hrs.	Freq. 3-6 hrs.	Cont. 6+ hrs.		0 hr.	Intermittent <1 hr.	Occas. 1-3 hrs.	Freq. 3-6 hrs.	Cont. 6+ hrs.
1-10 lbs				X		Bend			X
11-20 lbs				X		Twist			X
21-35 lbs				X		Crouch			X
36- 50 lbs			X			Kneel			X
51–75 lbs			X			Crawl			X
						Walk-Level Surface			X
Carry						Walk-Uneven Surface			X
1-10 lbs				X		Climb Stairs			X
11-20 lbs				X		Climb Ladder			X
21-35 lbs				X		Reach Above Shoulder			X
36-50 lbs.			X			Use of Arms					X
51-75 lbs.			X			Use of Wrist					X
						Use of Hands					X
Push						(a) Grasping					X
1-10 lbs				X		(b) Squeezing					X
11-20 lbs				X		(c) Fine finger dexterity					X
21-50 lbs				X		(d) Keyboarding				X
51-75 lbs			X			Drive vehicle		X
76-100 lbs			X			Operate Foot Control(s)		X
100 + lbs			X			Hand/eye/foot coordination			X
Pull						Environment
1-10 lbs				X		Inside					X
11-20 lbs				X		Outside				X
21-50 lbs.				X		Heat					X
51-75 lbs.			X			Cold				X
76-100 lbs.			X			Dusty					X
100 + lbs			X			Noisy					X
Communication				Wet/humid				X
Speaking					X	Other:_______
Seeing					X
Hearing					X

Must be able to communicate in English to co-workers, see to read manuals, operate computer, & distinguish colors for proper electrical repairs. Lifting devices or assistance is available for many tasks (cranes, hoists, co-workers).

Safety & Required PPE: Safety glasses, hearing protection, safety-toed boots, & gloves. Welding hood & gloves when welding. Must be willing and able to follow all company safety procedures and OSHA compliance policies.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is frequently exposed to a shop manufacturing environment. Shop manufacturing environment exposures include exposure to moving mechanical parts, machinery, tools and equipment, heights, vibration, fumes or airborne particles, motorized vehicles, welding and machining operations, outside weather conditions and exposure to the risk of electric shock. The employee may occasionally be required to work in high places and can occasionally be exposed to varying levels of dirt, dust, toxic or caustic chemicals, very warm and/or very chilly temperatures. The noise level in the shop can be very loud at times consistent with an industrial assembly facility and may require hearing protection.

EQUAL OPPORTUNITY STATEMENT

As an Equal Opportunity Employer, Astec does not discriminate on the basis of race, creed, color, religion, gender (sex), sexual orientation, gender identity, marital status, national origin, ancestry, age, disability, citizenship status, a person’s veteran status or any other characteristic protected by law or executive order.

This policy applies to all employment practices, personnel actions and all other terms and conditions of employment including but not limited to advertising, recruitment, selection, hiring, transfer, training and apprenticeship, promotion, upgrading, compensation, demotion, downgrading, layoff and determination, termination, overtime, access to benefits, education and social and recreational programs. The full cooperation of all employees and all levels of supervision is expected.